LICHENGDAPRECISION MANUFACTURING
Tool steel plate grade

1.2083 Precision Tool Steel Plates

1.2083 precision steel plates require a clear material-condition and finishing specification. If the project also requires a particular surface finish, corrosion-related requirement or later heat treatment, describe it separately from plate thickness and length/width tolerances. The supplied machining scope and acceptance follow the approved quotation.

Request a quotation Compare supply options
Top view of a plate with a machined surface, external product-form reference
External processed-plate referenceSource: Moldtoolsteel

External reference photograph illustrating product form; not a Lichengda delivery.

Select the work to be supplied

Grinding and Milling Options

Each catalog reference carries its selected scope into the quotation form. Finished dimensions, material records and acceptance follow the approved order.

1.2083 Two-Side Ground + Four-Side Milled Plates — model schematic
Model schematic · illustrative geometry
LCD-PL-1.2083-G2

Two-side ground + four-side milled

Precision grinding on two reference faces, with the four remaining faces milled. Thickness and length/width have separate tolerances.

Length / width
±0.10 mm
Thickness
±0.05 mm
Parallelism
0.04 mm / 100 mm between the ground reference faces
Material condition
Confirm the material condition for the order
Size scope
Maximum processing: 1200×800×400 mm; process review required

Material sourcing, delivery condition and any hardness requirement are confirmed in the quotation. Finished dimensions, reference faces, inspection and machining allowance follow the approved drawing. This grade is outside the published E1 scope.

Full finishing specification →Request this option
1.2083 Six-Side Precision Milled Plates — model schematic
Model schematic · illustrative geometry
LCD-PL-1.2083-M6

Six-side precision milled

All six faces precision milled to the agreed finished dimensions. Use the drawing to identify any additional grinding requirements.

Length / width
±0.10 mm
Thickness
±0.10 mm
Parallelism
0.08 mm / 100 mm
Material condition
Confirm the material condition for the order
Size scope
Maximum processing: 1200×800×400 mm; process review required

Material sourcing, delivery condition and any hardness requirement are confirmed in the quotation. Finished dimensions, reference faces, inspection and machining allowance follow the approved drawing. This grade is outside the published E1 scope.

Full finishing specification →Request this option
Grade and condition limits

1.2083 is outside the published E1 grade list. The listed G2 and M6 options retain their own tolerances. Send a different grinding scope or tighter requirement for separate technical review.

Grade designations are listed separately; no automatic equivalence or substitution is assumed. Per-100-mm parallelism does not define whole-plate flatness or surface roughness.

Drawing and Quotation Checklist

  • State the delivery condition and any subsequent heat treatment, polishing or corrosion-related service requirement. Plate grinding does not by itself define mirror polish or surface roughness.
  • Mark finished length, width and thickness, reference faces, tolerances, datums and any whole-plate geometric requirements.
  • Specify quantity, required material/hardness/dimensional records, any requested UT scope and delivery destination.

Include quantity, drawing revision, required inspection documents and delivery destination. Single-piece and small-batch inquiries are accepted.

Prepare a 1.2083 plate inquiry

Inspection and Production Planning

MTC material documentation, hardness and dimensional inspection reports can be requested. UT reports are available on request with an agreed scope. Regular plate sizes range from 100×100×20 to 800×600×300 mm; maximum processing size is 1200×800×400 mm, subject to grade, condition and finish review. This maximum does not carry the E1 tolerance.

Production schedule: 3–7 working days. Working days exclude weekends and statutory public holidays in China. The clock starts on the next working day after formal PO receipt, final drawing/specification approval and applicable deposit receipt are all completed. Transport time is separate.

Inspection and documentation →Compare plate finishing routes →View product photographs →

1.2083 Tool Steel Plate Questions

Which finishing options are listed for 1.2083 precision plates?

Two-side grinding with four-side milling uses ±0.05 mm for thickness and ±0.10 mm for length/width, with parallelism of 0.04 mm per 100 mm between the ground faces. Six-side milling uses ±0.10 mm in all three dimensions and parallelism of 0.08 mm per 100 mm. Size, condition and drawing review still apply.

Can 1.2083 be ordered with E1 six-side grinding at ±0.02 mm?

1.2083 is outside the published E1 grade/condition list. A different grinding or tolerance request can be submitted for separate technical review; the standard E1 tolerance is not automatically assigned.

Which delivery condition should be specified for 1.2083 plates?

State the required condition and any hardness acceptance requirement on the drawing or inquiry. Material sourcing, processing route and the actual supplied condition are confirmed in the quotation; no generic hardness range is assumed.

Does a ground 1.2083 plate automatically meet a mirror-polish requirement?

No. Ground faces and dimensional tolerances do not establish a mirror finish or a surface-roughness value. Specify any required surface condition, inspection method and acceptance criteria for separate review.

Start with your drawing.

Tell us the material, finish and requirements for your next project.

Prepare an inquiry