LICHENGDAPRECISION MANUFACTURING
Tool steel plate grade

S136 Precision Tool Steel Plates

S136 tool steel plates can be quoted for milling or two-side grinding, with the delivery condition defined on the order. The published S136 E1 option is for hardened and tempered blocks within the specified size range.

Request a quotation Compare supply options
Machined steel plates and blocks arranged on a pallet
Prepared plates and blocks

Product-form example. Grade, material condition and supplied configuration follow the approved order.

Select the work to be supplied

Grinding and Milling Options

Each catalog reference carries its selected scope into the quotation form. Finished dimensions, material records and acceptance follow the approved order.

S136 Two-Side Ground + Four-Side Milled Plates — model schematic
Model schematic · illustrative geometry
LCD-PL-S136-G2

Two-side ground + four-side milled

Precision grinding on two reference faces, with the four remaining faces milled. Thickness and length/width have separate tolerances.

Length / width
±0.10 mm
Thickness
±0.05 mm
Parallelism
0.04 mm / 100 mm between the ground reference faces
Material condition
Confirm the material condition for the order
Size scope
Maximum processing: 1200×800×400 mm; process review required

Finish dimensions and material condition are agreed for the selected grade. Large plates and additional geometric requirements need drawing-specific review.

Full finishing specification →Request this option
S136 E1 Six-Side Precision Ground Plates — model schematic
Model schematic · illustrative geometry
LCD-PL-S136-E1

E1 six-side precision ground

All six faces precision ground under the published E1 grade, condition and size limits.

Length / width
±0.02 mm
Thickness
±0.02 mm
Parallelism
0.02 mm / 100 mm
Material condition
Hardened and tempered
Size scope
L and W each ≤600 mm; T 10–200 mm

Hardened and tempered S136 blocks within the E1 envelope: length and width each ≤600 mm; thickness 10–200 mm.

Full finishing specification →Request this option
S136 Six-Side Precision Milled Plates — model schematic
Model schematic · illustrative geometry
LCD-PL-S136-M6

Six-side precision milled

All six faces precision milled to the agreed finished dimensions. Use the drawing to identify any additional grinding requirements.

Length / width
±0.10 mm
Thickness
±0.10 mm
Parallelism
0.08 mm / 100 mm
Material condition
Confirm the material condition for the order
Size scope
Maximum processing: 1200×800×400 mm; process review required

Finish dimensions and material condition are agreed for the selected grade. Large plates and additional geometric requirements need drawing-specific review.

Full finishing specification →Request this option
Grade and condition limits

E1 for S136 requires hardened and tempered condition, length and width each ≤600 mm, and thickness 10–200 mm. The three dimensional tolerances are ±0.02 mm; parallelism is 0.02 mm per 100 mm. Larger sizes, annealed material or additional requirements need separate review.

Grade designations are listed separately; no automatic equivalence or substitution is assumed. Per-100-mm parallelism does not define whole-plate flatness or surface roughness.

Drawing and Quotation Checklist

  • Distinguish the requested S136 material condition from any later heat treatment in your own process.
  • For E1, confirm hardened and tempered condition and the dimensions at final grinding.
  • Request the hardness report and mark the measurement datums and acceptance features on the drawing.

Include quantity, drawing revision, required inspection documents and delivery destination. Single-piece and small-batch inquiries are accepted.

Prepare a S136 plate inquiry

Inspection and Production Planning

MTC material documentation, hardness and dimensional inspection reports can be requested. UT reports are available on request with an agreed scope. Regular plate sizes range from 100×100×20 to 800×600×300 mm; maximum processing size is 1200×800×400 mm, subject to grade, condition and finish review. This maximum does not carry the E1 tolerance.

Typical production: 3–7 working days. Working days exclude weekends and statutory public holidays in China. The clock starts on the next working day after formal PO receipt, final drawing/specification approval and applicable deposit receipt are all completed. Transport time is separate.

Inspection and documentation →Compare plate finishing routes →View product photographs →

S136 Tool Steel Plate Questions

Does annealed S136 qualify for the published E1 tolerance?

The published S136 E1 scope requires hardened and tempered condition, length/width each ≤600 mm and thickness 10–200 mm. Annealed material needs a separately confirmed tolerance.

Is S136H assumed to be the same supplied grade as S136?

Supply follows the exact approved designation and material condition. A different drawing designation should be reviewed explicitly; the catalog does not authorize automatic substitution.

What if an S136 plate will be heat treated after delivery?

Identify the delivery condition and the operations remaining after plate preparation. Agree the allowance and acceptance stage, since later heat treatment or machining can change dimensions and geometry.

Start with your drawing.

Tell us the material, finish and requirements for your next project.

Prepare an inquiry